Solar potential in Eltham

What solar would make on your Eltham roof, what it could save, and what to check before you buy.

Updated November 2026 · Litmec Electrical, REC-10383

A 6.6 kW north-facing solar system in Eltham makes about 9,300 kWh a year, about 2% less than Melbourne: around 35 kWh a day in midsummer and 14 kWh a day in June. East or west-facing roofs make about 86% of that.

On a $450 quarterly bill, that could save roughly $550–800 a year. Eltham ranks 336th of the 429 places across Victoria we've modelled for solar output.

Solar output in Eltham

Output per kW, north
1,407 kWh/yr
Output per kW, east / west
1,206 / 1,190
Compared with Melbourne
-2%
Best month, per kW
5.3 kWh/day (Jan)
Worst month, per kW
2.2 kWh/day (Jun)
Council
Nillumbik Shire
Postcode
3095
Region
Melbourne's outer north
Eltham, north-facingMelbourne (Newport), north-facing
0123456Jan: 5.26 kWh a dayJan: 5.31 kWh a dayJanFeb: 4.97 kWh a dayFeb: 5.02 kWh a dayFebMar: 4.3 kWh a dayMar: 4.3 kWh a dayMarApr: 3.34 kWh a dayApr: 3.39 kWh a dayAprMay: 2.55 kWh a dayMay: 2.61 kWh a dayMayJun: 2.19 kWh a dayJun: 2.27 kWh a dayJunJul: 2.32 kWh a dayJul: 2.48 kWh a dayJulAug: 2.93 kWh a dayAug: 3.1 kWh a dayAugSep: 3.86 kWh a daySep: 3.99 kWh a daySepOct: 4.55 kWh a dayOct: 4.65 kWh a dayOctNov: 4.85 kWh a dayNov: 4.94 kWh a dayNovDec: 5.21 kWh a dayDec: 5.26 kWh a dayDec
Average daily output from 1 kW of panels in Eltham compared with Melbourne, by month (kWh). PVGIS 5.3, ERA5 2005–2023, 22.5° pitch, 14% losses.
Modelled for Eltham (-37.714, 145.148). Source: PVGIS 5.3 (European Commission Joint Research Centre), ERA5 data 2005–2023, 1 kW of panels with 14% system losses, at a 22.5° pitch. PVGIS.
SystemNorth-facing, kWh/yrEast-facing, kWh/yrWest-facing, kWh/yrJune, kWh/day
6.6 kW9,2847,9637,85314.5
8 kW11,2549,6529,51817.5
10 kW14,06712,06511,89821.9
13.2 kW18,56815,92615,70528.9

These figures use satellite and weather data for Eltham from 2005 to 2023 and already allow for heat, wiring and inverter losses. They don't know your roof: shade, pitch and the faces available decide the real number. Try the roof calculator for your own direction and pitch.

Solar in Melbourne's outer north

Craigieburn, Mickleham, Wollert and Mernda are some of the fastest-growing areas in Australia, so most homes are new, with modern switchboards and roofs split into several faces. Further east, Eltham, Diamond Creek and Hurstbridge are leafy, and tree shade is the main design question.

This area is split between the AusNet Services and Jemena networks; your bill shows which one you are on. Your distributor sets how much you can export and approves the connection; we apply for you before anything is ordered.

Shading from trees

Tall trees are common in and around Eltham, and shade costs more output than roof direction does. We check shade across the year, including the low winter sun, and use optimisers or microinverters where a few panels can't avoid it.

Older switchboards

A lot of older housing in Eltham still has ceramic fuses, no safety switches or an old fibrous switchboard backing, and those have to be fixed before solar connects. We're electricians, so the switchboard is checked and any work priced in the quote. Check your switchboard.

What solar could save in Eltham

For a home paying $450 a quarter with someone in some days, the calculator suggests a 6.6 kW system saving about $550–800 a year, or $1,000–1,400 with a 10 kWh battery. Your own bill gives a better answer: use the calculator below.

How it works with Litmec

Litmec Electrical is a registered electrical contractor based in Newport, about 27 km from Eltham. Site visits are free. We sell the system, design it from your bills, organise the paperwork, rebates and network approval, and stand behind the whole system with a 5-year warranty. Accredited installers we subcontract and supervise fit the panels, and our own electricians do any switchboard work. Not sure what size you need? Try the system finder.

Nearby

All towns in Melbourne's outer north · Solar across Victoria

Check your bill: solar for your Eltham home

A few quick questions, using Eltham's solar output. See the system that fits and what it could save, then get a free design and quote.

Building a new home? Skip the bill and send us your plans

  1. 1 Your bill
  2. 2 Your home
  3. 3 Your estimate
  4. 4 Roof and plans
  5. 5 Your details
Step 1: your bill

How much is your power bill?

Your bill covers
Got your bill handy? Use your exact figures
Step 2: your home

A bit about your home

Is anyone home during the day?
Do you already have solar?
Anything coming up? (tick any)
Power supply (check your switchboard or bill)

Your estimate

    How we worked this out

    We estimate your daily use from your bill and rates (about 30c per kWh and $1.10 a day supply unless you entered your own), then add typical loads for anything you ticked: about 6 kWh a day for an electric car, 4 for a pool pump and 6 for moving off gas.

    Solar output uses Melbourne's yearly average of about 3.5 kWh a day for each kW of panels. How much of it you use directly depends on who's home in the day; the rest charges a battery or is exported at about 4c per kWh.

    This is an indicative yearly average, not a quote. Roof direction, shading, your tariff and how you use power all change the result. An installer confirms every figure once they've seen your roof.

    Next: a few questions about your roof About a minute. Your answers and this estimate go to the installer, so you don't have to explain it all again.
    Step 4: your roof and plans

    Your roof and plans

    A few quick taps so an installer knows what they're looking at. If you're not sure, pick "Not sure" or skip it.

    What are you after?
    When would you like it done?
    What kind of home is it?
    How many storeys? (installers need this for safety gear and access)
    What's the roof made of? (have a look from the street)
    Does anything shade the roof? (trees, a taller house next door, a chimney)
    Roughly when was the home built? (older homes often need switchboard work first)
    What matters most to you? (tick any)
    How are you thinking of paying? (Solar Victoria offers interest-free loans to eligible homes)
    Step 5: your details

    Your details

    We'll call to book your free site visit, or outside about 100 km of Newport, a free assessment from your bill and roof photos. Your estimate and answers come with your details, so you won't have to explain it all again.

    How would you like to be contacted?

    Free and no obligation. We only contact you about this enquiry.

    Solar in Eltham: questions

    How much power do solar panels make in Eltham?

    Each kW of north-facing panels in Eltham makes about 1,407 kWh a year, so a 6.6 kW system makes about 9,300 kWh a year, or 25 kWh a day on average. East or west-facing panels make about 86% of that. (PVGIS satellite data.)

    Is solar better in Eltham than in Melbourne?

    In the model, panels in Eltham make about 2% less than Melbourne. Eltham ranks 336th of the 429 Victorian locations we've modelled. Roof direction and shade still matter more than location: east or west panels cost about 15%, and a shaded roof can cost more.

    Is solar worth it in Eltham?

    For most owner-occupied homes with a typical bill, yes. On a $450 quarterly bill with someone home some days, a 6.6 kW system in Eltham could save roughly $550 to $800 a year. Bigger bills, electric heating and daytime loads save more.

    Does Litmec install solar in Eltham?

    Yes. Eltham is about 27 km from our base in Newport. Site visits are free, and your contract and 5-year whole-of-system warranty are with Litmec Electrical.

    Who is the electricity distributor in Eltham?

    This area is split between the AusNet Services and Jemena networks; your bill shows which one you are on. The distributor sets export limits and approves the connection; we apply on your behalf before the system is ordered.

    See what your Eltham roof can do

    Free site visit from a licensed electrician: roof, shading and switchboard checked, options walked through.